Alesis ML-9600 Manual De Referencia

Chapter 8 

A

LESIS 

ML-9600 R

EFERENCE 

M

ANUAL

  

 

 

Loop Mode Page 

 
The MasterLink defaults to "Loop Off"; pressing UP/YES once will change the Loop mode to "Track 
Loop", which applies to Tracks in a Playlist as well as to tracks on a CD. Another press of the UP/YES 

button will change the Loop mode to "Playlist/CD Loop", which will loop an entire Playlist or CD 
indefinitely. 
 

8.3  U

TIL

3:P

LAYLIST 

B

ACKUP

 

This feature provides the ability to back up and restore all parameters of a Playlist to CD.   When 

creating a CD24, any DSP that has been applied to the Playlist is rendered to the audio during the CD 
creation process.  With the Playlist Backup function, all audio is saved to CD as un-rendered AIFF files, 
and the real-time Track DSP settings are saved to the CD as well. In other words, your Playlist may be 
preserved as a "work in progress", with the DSP settings saved separately from the raw, unprocessed 
Audio Files on the same CD. These discs are also ISO9660-compliant, so if you wish to access the un-
rendered audio in a PC or Macintosh, they can be accessed as easily as a CD24 disc. 

 
To initiate a Playlist Backup, press the UTILITY button repeatedly until Utility Page 3 is displayed, as 

shown in Figure 8.3.1. 
 

 

 

Playlist Backup Page 

 
Pressing the DOWN/NO button in this page will have no effect. Pressing the UP/YES button will 
prompt you with an "Are you sure? Y/N" message. Pressing DOWN/NO at that point will cancel 
the Playlist Backup operation. Pressing UP/YES at the prompt will begin the backup process. 

 

If there is no blank CD in the drive, the CD tray will eject and the display will prompt you to insert a 
blank CD, as in Figure 8.3.2. 
 

 

 

Insert Blank CD-R Screen