Epson 785EPX Hoja De Datos Del Producto
EPSON Stylus Photo 785EPX
10 -
EPSON Stylus Photo 785EPX
4/01
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
several times a year. Follow these steps:
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove all paper, then use a soft brush to clean any dust or
dirt from the sheet feeder.
3. Clean the exterior of the printer with a soft, damp cloth.
4. Clean ink out of the printer’s interior with a soft, damp
cloth.
5. Use a soft, dry cloth to clean the display and optional
preview monitor. Do not use liquid or chemical cleaners on
these parts.
these parts.
Don’t touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
for cleaning; they can damage the printer components
and case.
Don’t get water on the printer components and don’t
spray lubricants or oils inside the printer.
spray lubricants or oils inside the printer.
Don’t use any cleaning sheets included with special
paper; they may jam inside the printer.
paper; they may jam inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
installed when transporting the printer.
Be sure to remove the tape used in step 4 after
installing the printer in its new location.
installing the printer in its new location.
Follow these steps:
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extension and close the tray.
6. Repack the printer and its attachments in the original box
using the protective materials that came with them. See
your Start Here sheet.
your Start Here sheet.
Keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 8); if output is
misaligned, align the print head (see page 9).
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 8); if output is
misaligned, align the print head (see page 9).
Related Documentation
TM-SP785EPX EPSON Stylus Photo 785EPX Service
Manual
PL-SP785EPX
EPSON Stylus Photo 785EPX Parts Price
List
List
CPD-12098
EPSON Stylus Photo 785EPX Printer Basics
CPD-12099
EPSON Stylus Photo 785EPX Start Here
CPD-12101
EPSON Stylus Photo 785EPX Quick
Reference card
Reference card
CPD-12100
EPSON Stylus Photo 785EPX CD-ROM
with Reference Guide
with Reference Guide
Tape the ink
cartridge holder to
the printer case
cartridge holder to
the printer case