Epson 7850p Hoja De Datos Del Producto
EPSON PowerLite 7850p Projector
8
-
EPSON PowerLite 7850p Projector
6/03
Note: The image will be slightly shorter after adjusting. If it’s
important to maintain the correct aspect ratio, use the menu
system to perform keystone correction, as described below,
then adjust the Height setting as needed.
important to maintain the correct aspect ratio, use the menu
system to perform keystone correction, as described below,
then adjust the Height setting as needed.
❏ Press the
Menu
button on the remote control, select the
Setting
menu, and press
Enter
. From the Setting menu,
select
H/V-Keystone
in the Keystone menu and press
Enter
. Select
V-Keystone
(for vertical keystone distortion)
or
H-Keystone
(for horizontal keystone distortion) and
press
Enter
. Use the
pointer button on the remote
control to adjust the keystone setting as needed.
Using Quick Corner
Use Quick Corner to correct the image shape when it’s
uneven on all sides.
uneven on all sides.
1. Press the
Menu
button on the remote control (or on the
projector’s control panel).
2. Select the
Setting
menu and press
Enter
.
3. From the Setting menu, select
Keystone
and press
Enter
.
4. Select
Quick Corner
and press
Enter
.
You see this screen:
5. Press the
Enter
button to
select the corner you want to
adjust.
adjust.
6. Use the
pointer button on
the remote control (or the
arrow buttons on the
projector) to adjust the shape.
arrow buttons on the
projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed
to adjust any remaining
corners.
corners.
8. When done, press the
ESC
button on the remote control to
exit the menu system.
If
Quick Corner
remains selected in the Keystone menu, the
Quick Corner screen appears whenever you press the
projector’s
projector’s
Keystone
buttons. You can then follow steps 5
through 8 above to correct the shape of your image, or press
ESC
to exit Quick Corner.
Correcting Computer Images
If you’ve connected a
computer and the image
doesn’t look right or fit
properly on the screen, press
the
computer and the image
doesn’t look right or fit
properly on the screen, press
the
Auto
button on the
remote control (or the
Auto/Enter
button on the
projector’s control panel).
This automatically resets the projector’s tracking, sync,
resolution, and position settings.
This automatically resets the projector’s tracking, sync,
resolution, and position settings.
Note: You must be projecting an image for this button to have
any effect. The
any effect. The
Auto
button works only with computer images.
If vertical stripes appear in the projected image and the
Auto
button doesn’t correct the problem, hold down the
Shift
button on the projector’s control panel while pressing either
the
the
Tracking +
or the
Tracking –
button.
If the image appears fuzzy or flickers and the
Auto
button
doesn’t correct the problem, hold down the
Shift
button while
pressing either the
Sync +
or
Sync –
button.
Note: Also make sure you have selected the correct Computer or
BNC Input option in the Setting menu for your computer. See the
User’s Guide for more information.
BNC Input option in the Setting menu for your computer. See the
User’s Guide for more information.
[
]:Adjust
Adjust
[ ] :Move next
[ ] :Move next
[ESC]
[ESC]
[ESC]
:Return (Press 1 second to
:Return (Press 1 second to
reset)
reset)
/
Auto
button
button