Airlinkplus ar315w Guía Del Usuario

Descargar
Página de 96
Operation and Status 
39 
• 
The most common messages are listed in the table below. 
• 
The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen. 
Buttons 
Connect 
If not connected, establish a connection to your ISP. 
Disconnect 
If connected to your ISP, hang up the connection. 
Clear Log 
Delete all data currently in the Log. This will make it easier to 
read new messages. 
Refresh 
Update the data on screen. 
 
Connection Log Messages 
Message 
Description 
Connect on Demand 
Connection attempt has been triggered by the "Connect auto-
matically, as required" setting. 
Manual connection 
Connection attempt started by the "Connect" button. 
Reset physical connection 
Preparing line for connection attempt. 
Connecting to remote 
server 
Attempting to connect to the ISP's server. 
Remote Server located 
ISP's Server has responded to connection attempt. 
Start PPP 
Attempting to login to ISP's Server and establish a PPP con-
nection. 
PPP up successfully 
Able to login to ISP's Server and establish a PPP connection. 
Idle time-out reached 
The connection has been idle for the time period specified in 
the "Idle Time-out" field. The connection will now be termi-
nated. 
Disconnecting 
The current connection is being terminated, due to either the 
"Idle Time-out" above, or "Disconnect" button being clicked. 
Error: Remote Server not 
found 
ISP's Server did not respond. This could be a Server problem, 
or a problem with the link to the Server. 
Error: PPP Connection 
failed 
Unable to establish a PPP connection with the ISP's Server. 
This could be a login problem (name or password) or a Server 
problem. 
Error: Connection to 
Server lost 
The existing connection has been lost. This could be caused by 
a power failure, a link failure, or Server failure. 
Error: Invalid or unknown 
packet type 
The data received from the ISP's Server could not be proc-
essed. This could be caused by data corruption (from a bad 
link), or the Server using a protocol that is not supported by 
this device.