Airlinkplus ar315w Guía Del Usuario

Descargar
Página de 96
 
88 
Solution 2: 
The Wireless Router processes the data passing through it, so it is not trans-
parent. 
Use the Special Applications feature to allow the use of Internet applications 
that do not function correctly. 
If this does solve the problem you can use the DMZ function. This should 
work with almost every application, but: 
• 
It is a security risk, since the firewall is disabled. 
• 
Only one (1) PC can use this feature. 
Wireless Access 
Problem 1: 
My PC can't locate the Wireless Router. 
Solution 1: 
Check the following. 
• 
Your PC is set to Infrastructure Mode. (Routers are always in Infra-
structure Mode
)  
• 
The SSID on your PC and the Wireless Router are the same. 
Remember that the SSID is case-sensitive. So, for example "Work-
group" does NOT match "workgroup". 
• 
Both your PC and the Wireless Router must have the same setting for 
WEP. The default setting for the Wireless Router is disabled, so your 
wireless station should also have WEP disabled. 
• 
If WEP is enabled on the Wireless Router, your PC must have WEP 
enabled, and the key must match. 
• 
If the Wireless Router's Wireless screen is set to Allow LAN access to 
selected Wireless Stations only
, then each of your Wireless stations must 
have been selected, or access will be blocked. 
• 
To see if radio interference is causing a problem, see if connection is 
possible when close to the Wireless Router.  
Remember that the connection range can be as little as 100 feet in poor 
environments. 
Problem 2: 
Wireless connection speed is very slow. 
Solution 2: 
The wireless system will connect at the highest possible speed, depending on 
the distance and the environment. To obtain the highest possible connection 
speed, you can experiment with the following: 
• 
Wireless Router location. 
Try adjusting the location and orientation of the Wireless Router. 
• 
Wireless Channel 
If interference is the problem, changing to another channel may show a 
marked improvement. 
• 
Radio Interference 
Other devices may be causing interference. You can experiment by 
switching other devices Off, and see if this helps. Any "noisy" devices 
should be shielded or relocated. 
• 
RF Shielding 
Your environment may tend to block transmission between the wireless 
stations. This will mean high access speed is only possible when close to 
the Wireless Router.