GE p2s975semss Guia De Especificaciones

Descargar
Página de 2
For answers to your Monogram,
® 
GE Profile
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
Specification Revised 7/09
230136
Rear filler strip or backguard are available for  
these ranges
Note:  
Door handle protrudes 3” from door face.  
Cabinets and drawers on adjacent 45° and 90°  
walls should be placed to avoid interference with  
the handle.
Note: Cabinets installed adjacent to slide-in  
ranges must have an adhesion spec of at least  
194° temperature rating.
Optional Kits for Slide-In Gas Ranges: 
(Available at additional cost)
Lower Trim Kits 
JXS56BB - Lower Trim Kit (Black)
Accessory Backguards 
JXS32SS - Brushed-Chrome Accessory Backguard 
JXS37BB - Black Accessory Backguard
Rear Filler Strip 
WB07T10680 - Black Filler Strip Assembly
Installation Information: Before installing, consult  
installation instructions packed with product for   
current dimensional data.
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation  
of the range.
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" 
Door Clearance
From Front 
Surface of 
Countertop
31-1/4
30
A*
Accessory
Backguard
36
2" 
(Grates)
24
Acceptable 
Gas Line & 
Electrical 
Outlet Area
Max. depth of 
cord, plug,
receptacle box
& gas hookup
3-1/2" to prevent
interference   
with drawer
30" Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
30" Min. to 
unprotected 
cabinet from
countertop
23-3/16
18" Min.
13" Max.
3
29-15/16" Min.
30-1/16" Max.
25
9/16
7
12
15
*A – JXS37 is 5-1/4" and JXS32 is 4" 
27-1/2**
44-3/4
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 30-1/2.
B is 9-1/2" from walls on either side for P2S975, PGS975 
and PGS908 and 6” for PGS968
B
35-7/8"–38"
from floor to
countertop
Dimensions and Installation Information (in inches) 
Counter Cutout Dimensions (in inches) 
P2S975SEM 
GE Profile
™ 
30" Dual Fuel Slide-In Gas Range
 
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" 
Door Clearance
From Front 
Surface of 
Countertop
31-1/4
30
A*
Accessory
Backguard
36
2" 
(Grates)
24
Acceptable 
Gas Line & 
Electrical 
Outlet Area
Max. depth of 
cord, plug,
receptacle box
& gas hookup
3-1/2" to prevent
interference   
with drawer
30" Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
30" Min. to 
unprotected 
cabinet from
countertop
23-3/16
18" Min.
13" Max.
3
29-15/16" Min.
30-1/16" Max.
25
9/16
7
12
15
*A – JXS37 is 5-1/4" and JXS32 is 4"
 
27-1/2**
44-3/4
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 30-1/2.
B is 9-1/2" from walls on either side for P2S975, PGS975 
and PGS908 and 6” for PGS968
B
35-7/8"–38"
from floor to
countertop