GoVideo dv2150 Manual Del Producto

SYMPTOM

CAUSE

SOLUTION

Picture from external input is 

distorted 

The video signal from the external 

device is copy-protected. 

Connect the device directly to your 

TV. 

Some channels are skipped over 

when using CH 

The skipped channels were deleted 

with the Add/Remove feature. 

See “Add/Remove Channels” on page 

23. 

Picture or sound of broadcasting 

channel is weak or missing. 

Antenna or cables are loose. 

Tighten connections or replace cable. 

Wrong TV Signal is selected in the 

DVD+VCR Setup menu. 

See “Signal Type” on page 24.

Camcorder image via AV input 

to DVD+VCR is not shown on TV 

screen.

Camcorder is off. 

Turn camcorder on and operate 

properly. 

DVD+VCR’s input is not set to Video 1 

or Video 2.

Press TV VIEW to select the correct 

input. 

Cannot record or did not record 

successfully. 

The source you are trying to record is 

copy- protected.

You cannot record the source.

When setting the recording channel, 

the channel is tuned to the TV’s own 

tuner.

Select the channel on the DVD+VCR’s 

built-in TV tuner. 

Timer Recording does not work. 

DVD+VCR is not set to the correct 

time. 

Set date and time; see page 22.

Timer has been programmed 

incorrectly. TIMER indicator light does 

not appear after programming timer.

Reprogram Timer; see page 39. 

Stereo Audio Recording and/or 

Playback not present. 

TV is not Stereo-compatible. 

No solution. 

Broadcast program is not in stereo 

format. 

No solution. 

DVD+VCR AV Out jacks are not 

connected to TV AV In jacks. 

Make AV connections. Stereo is 

available only via AV output from 

DVD+VCR. 

DVD+VCR Audio/Video Out is not 

selected for viewing at the TV. 

Select AUX or AV source as TV input. 

Remote control does not work 

properly. 

The remote control is not pointed at 

the remote sensor of the DVD+VCR. 

Point the remote control at the 

remote sensor of the DVD+VCR. 

The remote control is too far from the 

DVD+VCR. 

Operate the remote control within 

23 ft (7 m). 

There is an obstacle in the path of the 

remote control and the DVD+VCR. 

Remove the obstacle. 

The batteries in the remote control 

are dead.

Replace the batteries with new ones. 

The remote is in the incorrect mode.

Press DVD for DVD control. Press VCR 

for VCR control.

Disc Menu, Angle, Subtitle and/or 

Audio functions do not work.

Not all discs include these features.

No solution.

Poor quality VHS playback.

The VCR heads are dirty.

Use a head cleaner to clean the VCR 

heads.