GoVideo r6540 Manual Del Producto

You can connect a digital camcorder to the DVD Recorder using a 

single DV cable for input and output of audio, video, data and control 

signals.

• Power off the DVD Recorder.
• Connect the digital camcorder to the front DV Input using a 

standard DV cable (not included).

• Power the DVD Recorder back on.
• Press Disc/Live on the remote control to switch to Live mode.
• Press Input until DV appears on your television screen.

• Cue the digital camcorder to the desired starting point, then 

press Record on the DVD Recorder. See “Recording from an 

• For Timer Recording, select DV as your Input Source in the 

Timer Record menu; see “Set Input Source” on page 30.

Follow these steps to connect an external audio/video source, such as 

a standard camcorder, VCR, or video game to your DVD Recorder.

• Connect your source device to the line inputs on the front 

panel (Line 1) or rear panel  (Line 2) of the DVD Recorder.

• Press Disc/Live on the remote control to switch to Live mode.
• Press Input until Line 1, Line 1-S, Line 2, or Line 2-S appears on your television screen. The “S” refers to the S-Video inputs.

• Press Input until Line 1, Line 1-S, Line 2, or Line 2-S appears on your television screen. Cue your external device to the desired starting 

point, then press Record on the DVD Recorder. See “Recording from an External Device” on page 23.

• For Timer Recording, select L1, L1-S, L2, or L2-S as your Input Source in the Timer Record menu; see “Set Input Source” on page 30.