Hitachi 802.11b/g/n USB USBWL11N Manual De Usuario

58

The SNMP (Simple Network Management Protocol) enables to manage the 

projector information, which is a failure or warning status, from the computer on 

the network. The SNMP management software will be required on the computer 

to use this function. 

• It is recommended that SNMP functions be carried out by a network 

administrator. 

• SNMP management software must be installed on the computer to monitor 

the projector via SNMP.

• To use the downloaded MIB file, specify the file by your SNMP 

manager. 

SNMP Settings (&22)
Configure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1)  Enter 

“http://192.168.1.10/” into the address bar of the web browser, and 

select Projector Web Control from the selection window. 

2)  Enter your user name and password, and then click the 

[OK]. 

3) Click the 

[Port Settings] on the main menu. 

4) Click the 

[Download MIB file] to download a MIB file.

5)  Click the 

[Enable] check box to open the SNMP Port. Set the IP address to 

send the SNMP trap to when a Failure/Warning occurs.

6) Click the 

[Security Settings] on the main menu. 

7) Click the 

[SNMP] and set the community name on the screen that is displayed.

8)  Configure the settings for Trap transmission of Failures/Warnings. Click the 

[Alert Settings] on the main menu and select the Failure/Warning item to be 

configured. 

9)  Click the 

[Enable] check box to send out the SNMP trap for Failures/Warnings. 

Clear the 

[Enable] check box when SNMP trap transmission is not required. 

10) Click the 

[Apply] button to save the settings.

• A Network Restart is required after the 

Community name has been 

changed. Click the 

[Network Restart] and configure the following items.

• A Network Restart is required after the 

SNMP Port configuration 

settings have been changed. Click the 

[Network Restart] and configure the 

following items.