Gateway 310 aafes Guía Del Usuario

Descargar
Página de 244
194
Chapter 12: Troubleshooting
www.gateway.com
You see a “Data error” message
This may be the result of a defective area on the hard drive. To fix hard 
drive problems, run the Error checking program. For more information, 
see 
.
The hard drive cannot be accessed, or you see a “General failure 
reading drive C” error message
Try restarting your computer by pressing C
TRL
+A
LT
+D
EL
.
Open the computer case and make sure that the cables are connected 
correctly to the hard drive and the system board. For more information 
about connecting the hard cables, se
If your computer has been subjected to static electricity or physical shock, 
you may need to reinstall the operating system.
The computer does not recognize an IDE drive
Make sure that the IDE connectors are enabled in the BIOS Setup utility. 
To enter the BIOS Setup utility, restart your computer, then press and hold 
F1 while your computer restarts.
Reinstall the device driver. For more information, see 
Open the computer case and make sure that the IDE cable is connected 
to the system board IDE connector and the hard drive connector. For more 
information about connecting the hard cables, see 
Internet
You cannot connect to the Internet
Make sure that your computer is connected to the telephone line and the 
telephone line has a dial tone. Use the setup poster to make sure that the 
connections have been made correctly.
Make sure that no one else is using the telephone line.
If you have the call waiting feature on your telephone line, make sure that 
it is disabled.
Make sure that your account with your Internet service provider (ISP) is 
set up correctly. Contact your ISP technical support for help.