Gateway ld-220 Guía Del Usuario

www.gateway.com

c. Press TUNING+/ – again to select another channel.

B. MANUAL TUNING
It is for selecting stations, which cannot be tuned
automatically (manual selection).
Press the “AUTO” key on remote control to activate
manual selection. Each time the TUNING +/– button is
pressed momentarily (0.5 second or less), the frequency
changes by a fixed step.

FM : 100 kHz steps
AM(MW) : 10 kHz steps

This facility is used to store FM and AM(MW)
broadcasting from channels 1 to 20 repeatedly.

a. Press FUNCTION to select broadcast FM or

AM(MW), choose the band FM or AM(MW) you
want.

b. Press TUNING– or TUNING+ until the displaying

frequency begins to change, then release. When
this system tunes to a station the scanning will stop.

c. Press the “MEMO” key on remote control. A preset

number will appear on the display. Use TUNING +/–
to choose your desired preset number, then press
the “MEMO” key again to confirm.

d. Repeat the above procedures to store from 1 to 20

stations.

e. When you want to listen to the preset broadcast

station, press PRESET+/- (3/remote control) to
select your desired preset staiton.

Press the ST/MONO button to alternate between
Stereo mode and Mono mode.

STEREO
FM stereo broadcasts are received in stereo and the
“ ” indicator lights on the display.

MONO
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noice.
If the DISPLAY button is pressed, the details of the
incoming digital source will be displayed.

1. Select your FM or AM band.

2. Press the “APS” on remote control, it will search the
available stations. The searched stations will be
memorized in the respective band memory up to
maximum 20 memories.

Note: Weak station may also be storied in memorizes,
so manual memory presetting may be needed in order
to have better receiving.

AUTO

MEM

MHZ

99.30

AUTO

MEM

MHZ

99.30

AUTO

MHZ

99.30

AUTO

MEM

MHZ

99.30