Gateway 600YG2 Manual Suplementario
44
Replacing Components in Your Gateway 600YG2
www.gateway.com
Replacing the cooling assembly
Tools you need to complete this task:
Screws removed during this task:
To replace the cooling assembly:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
2
If your notebook has 802.11 wireless networking built in, remove the
Mini PCI module by following the instructions in “Replacing the 802.11
Mini PCI card” on page 13.
Mini PCI module by following the instructions in “Replacing the 802.11
Mini PCI card” on page 13.
3
Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 24.
the keyboard cover” on page 24.
4
Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 26.
keyboard” on page 26.
Flat-blade screwdriver
Phillips #0 screwdriver
1 chrome 2.5 × 7 mm
(near touchpad)
1 chrome 2.5 × 4 mm
(near multifunction
buttons) (palm rest)
(near touchpad)
1 chrome 2.5 × 4 mm
(near multifunction
buttons) (palm rest)
4 chrome 2.5 × 5 mm
(back)
(back)
13 chrome 2.5 × 5 mm
(bottom)
(bottom)
5 chrome 2.5 × 4 mm
(keyboard)
(keyboard)
4 chrome 2.5 × 5 mm
(hinge covers)
(hinge covers)
4 or 6 chrome 2.5 × 7 mm
(LCD panel hinges)
(LCD panel hinges)