Gateway M280 Instruccion De Instalación
Power indicator
Battery indicator
Connect the phone cord (included)
to the modem jack ( ) if using
dialup Internet access. Or connect
your Ethernet ( ) or USB ( )
cable (not included) if using high-
speed access.
to the modem jack ( ) if using
dialup Internet access. Or connect
your Ethernet ( ) or USB ( )
cable (not included) if using high-
speed access.
Front
Microphone jack
Headphone jack
LCD panel release latch
Back
Monitor port
Modem jack
Left
PC Card slot
Right
IEEE 1394 port
3
2
1
4
Connect to the Internet
(optional)
Make sure that the Lock is in the up
postition. Press the power button,
then follow the on-screen instructions
to complete Windows setup.
postition. Press the power button,
then follow the on-screen instructions
to complete Windows setup.
Start the Convertible Notebook PC
With the label side down, slide
the battery into the battery
compartment until it clicks.
Then lock it in place.
the battery into the battery
compartment until it clicks.
Then lock it in place.
Leave the AC adapter plugged in for
at least three hours the first time, so
the battery will fully charge.
at least three hours the first time, so
the battery will fully charge.
Connect to AC power
Install the battery
Power connector
Speaker
Ethernet jack
Modualr bay
USB ports
Kensington™ lock slot
© 2005 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.
Pen
Ventilation fan
Caution: Do not block
Memory card reader
Speaker
Docking port