Gateway mx3311b Manual De Hardware

www.gateway.com

Place the new keyboard keys-down on your notebook with the space bar 
away from you.

Make sure the brown keyboard connector clip is slid to the back of the 
notebook, insert the cable into the connector, then slide the brown 
connector clip forward to lock the connectors in place.

Rotate the keyboard toward the LCD panel until the keyboard is 
almost face-up.

Insert the tabs on the front edge of the keyboard into the slots under the 
palm rest. You may need to press down on the keyboard keys along the 
front edge of the keyboard to seat the retaining tabs into their 
corresponding slots.

Gently press the keyboard down until it is flat all the way across. The 
keyboard should easily fall into place. Be careful not to damage the 
LCD panel.

Place the cover on the notebook, then press down on the cover in several 
places until it clicks in place. The cover is correctly mounted when you can 
run you finger along the cover and find no loose spots. The cover should 
be flat all the way across.

Close the LCD panel, then turn the notebook over so the bottom is facing 
up.

Replace the two keyboard screws you removed in 

.

Insert the battery, then turn your notebook over.

Connect the power adapter, modem cable, and network cable.

Reconnect all peripheral devices and replace any Express cards.