Gateway 2500 Guía Del Usuario
60 Using Your Gateway Solo 2500 Multimedia Notebook
Battery gauge system indicator
This icon appears in the system status indicator panel. See “System Status
Indicators (LCDs)” on Page 8 for more information about the icon status
indicators.
Indicators (LCDs)” on Page 8 for more information about the icon status
indicators.
Pop-up status display
This “pop-up display” provides information about the battery charge and
power status.
power status.
Press
F
N
+F2
(status key) to display the pop-up menu in the upper left corner
of the LCD. The menu displays status information in the following order:
1.
The 1st line shows battery charge status percentage where 100%
represents a fully charged battery. If the battery level is low, a warning
icon appears.
represents a fully charged battery. If the battery level is low, a warning
icon appears.
2.
The 2nd line indicates the current power management setting (OFF,
ON, or DC).
ON, or DC).
3.
The 3rd line shows the current power source (AC ON or AC OFF).
4.
The 4th line displays the current BIOS used on the system.
The menu stays open for about ten seconds.
Setting the power button
You can change the Power Button Mode in the BIOS setup program from
On/Off to Standby/Resume. See “Using the BIOS Setup Utility” on Page
70 for more information about accessing the BIOS Power menu settings to
change the Power Button Mode.
On/Off to Standby/Resume. See “Using the BIOS Setup Utility” on Page
70 for more information about accessing the BIOS Power menu settings to
change the Power Button Mode.
Refer to the next section “Using the suspend and standby modes” on Page
61 for more information about using the Suspend and Standby modes.
61 for more information about using the Suspend and Standby modes.