Gateway 3450 Guía Del Usuario
223
Software support tools
www.gateway.com
The text on the display is dim or difficult to read
■
Adjust the brightness controls.
■
Move the computer away from sources of electrical interference such as
televisions, unshielded speakers, microwaves, fluorescent lights, and
metal beams or shelves.
televisions, unshielded speakers, microwaves, fluorescent lights, and
metal beams or shelves.
■
Change the display settings. For more information, see “Adjusting the
screen and desktop settings” on page 136.
screen and desktop settings” on page 136.
Memory
You receive a “Memory error” message
■
Make sure the memory modules are inserted correctly in the memory bay
slot. For more information, see “Installing memory” on page 157.
slot. For more information, see “Installing memory” on page 157.
■
Use diagnostic programs to help determine if a memory module is failing.
For more information, see “Installing memory” on page 157.
For more information, see “Installing memory” on page 157.
You receive a “Not enough memory” error message
■
Close all programs, then restart the computer.
Modem
Your modem does not dial or does not connect
■
Make sure your computer is connected to the telephone line and the
telephone line has a dial tone. Use the Setup poster to make sure that
the connections have been made correctly.
telephone line has a dial tone. Use the Setup poster to make sure that
the connections have been made correctly.
■
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
■
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
■
If you have additional telephone services such as call waiting, call
messaging, or voice mail, make sure that all messages are cleared and call
waiting is disabled before using the modem. Contact your telephone
service to get the correct code to temporarily disable the service. Also
make sure the modem dialing properties are set appropriately.
messaging, or voice mail, make sure that all messages are cleared and call
waiting is disabled before using the modem. Contact your telephone
service to get the correct code to temporarily disable the service. Also
make sure the modem dialing properties are set appropriately.