Gateway 9550 Guía Del Usuario

www.gateway.com

■

Make sure the memory modules are inserted correctly in the memory bay 
slot. For more information, see “Installing memory” on page 152.

■

Use diagnostic programs to help determine if a memory module is failing. 
For more information, see “Installing memory” on page 152.

■

Close all programs, then restart the computer.

■

Make sure your computer is connected to the telephone line and the 
telephone line has a dial tone. See “Connecting the modem” on page 34 
to make sure that the connections have been made correctly.

■

Make sure that the modem cable is less than 6 feet (1.8 meters) long.

■

Remove any line splitters or surge protectors from your telephone line, 
then check for a dial tone by plugging a working telephone into the 
telephone wall jack.

■

If you have additional telephone services such as call waiting, call 
messaging, or voice mail, make sure that all messages are cleared and call 
waiting is disabled before using the modem. Contact your telephone 
service to get the correct code to temporarily disable the service. Also 
make sure the modem dialing properties are set appropriately.

Click 

, then select 

. If you do not see the 

 icon, click 

.

Click/double-click the 

 icon, then click the 

 tab.

Select the location from which you are dialing, then click 

.

Make sure all settings are correct.