Gateway dx4300 Guía Del Usuario

The

Create Backup Disc

dialog box opens.

This dialog box tells you the number of blank,

recordable discs you will need to complete the

recovery discs. Make sure that you have the

required number of identical, blank discs ready

before continuing.

3 Insert a blank disc into the drive indicated in the

Burn to list, then click Next. The first disc begins

recording, and you can watch its progress on the

screen.

When the disc finishes recording, the drive ejects

it.

4 Remove the disc from the drive and mark it with

a permanent marker.

5 If multiple discs are required, insert a new disc

when prompted, then click OK. Continue

recording discs until the process is complete.

Recovering pre-installed software and

drivers

As a troubleshooting step, you may need to reinstall

the software and device drivers that came pre-installed

on your computer from the factory. You can recover

using either your hard drive or the backup discs you

have created.

•

New software—If you need to recover software

that did

not

come pre-installed on your

computer, you need to follow that software’s

installation instructions.

•

New device drivers—If you need to recover

device drivers that did

not

come pre-installed on

your computer, follow the instructions for

updating drivers in

Important

Write a unique, descriptive label on each disc, such as

“Windows Recovery Disc 1 of 2.” or “Apps/Drivers Recovery

disc.”