Gateway fx4710 Guía De Referencia

Descargar
Página de 126
CHAPTER 6: Troubleshooting
74
Modem (dial-up)
See also 
Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the 
modem jack and not the Ethernet network jack.
Make sure that your computer is connected to the 
telephone line and the telephone line has a dial tone.
Remove any line splitters or surge protectors from your 
telephone line, then check for a dial tone by plugging a 
working telephone into the telephone wall jack.
Make sure that call waiting is disabled before using the 
modem. Contact your telephone service provider to get 
the correct code to temporarily disable the service. 
Make sure that the modem dialing properties are set 
correctly.
 
To check the dialing properties:
1
Click (Start), type 
modem, then press E
NTER
2
If the Location Information dialog box opens, enter 
the information for your area, then click OK.
3
Click the Dialing Rules tab, click the location from 
which you are dialing, then click Edit.
4
Make sure that all settings are correct.
Check for line noise (scratchy, crackling, or popping 
sounds), which is a common problem that can cause the 
modem to connect at a slower rate, interrupt downloads, 
or even disconnect. You can also call your telephone 
service and have the telephone line checked for noise or 
low line levels.
Try another telephone line (either a different telephone 
number in your house or a telephone line at a different 
location). If you can connect on this line, call your 
telephone service.
Help
For more information about dialing properties, click Start, then 
click Help and Support. Type 
dialing in the Search Help box, then 
press E
NTER
.
8513057.book  Page 74  Tuesday, May 6, 2008  9:35 AM