Bryston SP1.7 Manual De Usuario

SP1.7 SPECIFICATIONS

Inputs
Analog Audio:

Six stereo (RCA) pairs, One 5.1 channel (RCA) input

Digital:

4 coaxial (RCA) 75 Ohms, 2 Optical (TOSLINK?), conforms to S/PDIF standard.

Pro version 1 AES/EBU input (XLR) 110 Ohms

Infrared:

1 mini phone jack

RS-232:

D9 connector (bidirectional)

Outputs
Analog Outputs:

Left, Centre, Right, Right Surround, Left Surround, and Subwoofer on 6 unbalanced

(RCA) and 6 balanced (XLR).

2 stereo (RCA) pairs of Record Outputs.

1 pair (RCA) Surround Back outputs

Trigger:

One 12V on/off trigger, One 12V programmable trigger, to source 80mA total.

Remote
30 button, Hand-Held, Infrared remote control unit operates with two AAA batteries (included).

Performance Specifications

A/D Conversion:

24-Bit, 48kHz Delta-Sigma

D/A Conversion:

24-Bit, 96kHz Delta-Sigma

DSP Engine:

Motorola 56367

Power Supply:

Dual, Linear, Toroidal

Frequency Response:

20Hz to 20kHz +/- 0.25 dB

THD+Noise:

Less than 0.006% in DSP modes; Less than 0.0025% in Bypass mode 20Hz to

20kHz at maximum output level.

Signal-to-Noise Ratio:

105dB in DSP Modes; 110dB in 2ch Bypass Mode ; 22kHz bandwidth, Ref. 1kHz at

maximum output level

Input Level:

2 Vrms in DSP modes; 4 Vrms in Bypass Mode

Input Impedance:

50kOhms

Output Level:

8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.

Output Impedance:

110 Ohms

Bass Management:

2nd Order HPF(x5), 4th Order LPF; 60 – 220 Hz Crossover Freq.

Physical Specifications
Power Requirements

100VAC, 115VAC, and 230VAC models. 200 VA. IEC detachable power cord (included)

Dimensions:

17” W x 13.5” D x 3.8” H; rackmount 19” W x 13.5” D x 3.5” H

Weight:

approx 22 lbs (10 kg)

Chassis Temp:

0 to 50 deg Celsius

Specifications subject to change without notice.