Sony kdf-42we655 Guía Del Usuario
Introducing the Sony LCD Projection TV
22
KDF-WE/WF655
2-059-370-11 (1)
Push the cover back on. Make sure that the hole on the cover aligns with
the hole on the unit. Reattach the lamp cover by tightening the screw.
the hole on the unit. Reattach the lamp cover by tightening the screw.
7
Reattach the front panel securely.
8
Tightly screw the side panel in its place.
✍
If the screw of the lamp cover is slanted, the lamp may not light up
properly. In such a case, take out the screw and reinsert it straight
into the screw hole, then tighten the screw completely (see page 126).
properly. In such a case, take out the screw and reinsert it straight
into the screw hole, then tighten the screw completely (see page 126).
✍
If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 126).
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 126).
✍
Consult your Sony dealer for a Sony XL-2200 (for WF655 series)
replacement lamp.
replacement lamp.
✍
Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. Rough handling may cause the LCD
projection TV to fall, damaging the TV, the TV stand and/or the floor.
the connecting cords. Rough handling may cause the LCD
projection TV to fall, damaging the TV, the TV stand and/or the floor.
STD/DUO
POWER
PRO
01COV.book Page 22 Thursday, July 15, 2004 7:31 PM