Sony fwd-50px3 Guía De Operación

 GB

The connectors marked with 6 and 8 on the side 
panel are slot-in types and can be fitted with any of the 
following optional adaptors (not supplied).
For details on installation, consult your Sony dealers.

For details on the optional adaptors for system 
expansion, BKM-FW series, see each instruction 
manual.

This is the same as the optional adaptor preinstalled in 
the 8 OPTION 2 slot. See page 9.

1

/C

B

/B, P

R

/C

R

/R IN (BNC): Connects to 

the analog RGB signal or component signal output 
of a piece of video equipment or PC.

2

HD, VD IN (BNC): Connects to the 
synchronization signal output of a PC.

When inputting a component signal, be sure not to input sync 
signals to the HD and VD connectors. If you do so, the 
picture may not be displayed properly.

3

AUDIO (Stereo mini jack): Inputs an audio 
signal. Connects to the audio output of a piece of 
video equipment or PC.

1

RGB/COMPONENT IN (D-sub 15-pin): 
Connects to the component signal output or 
analog RGB signal output of a piece of video 
equipment or PC. For details on inputting a 
component signal to the connector, see “Pin 
assignment” on page 42.

When inputting a component signal, be sure not to input sync 
signals to pins 13 and 14. If you do so, the picture may not be 
displayed properly.

2

RGB/COMPONENT OUT (D-sub 15-pin): 
Connects to the component signal input or analog 
RGB signal input of a piece of video equipment or 
PC. Pictures input from the connectors marked as 
1

 above will be output.

3

AUDIO IN (Stereo mini jack): 
Inputs an audio signal. Connects to the audio 
signal output of a piece of video equipment or PC.

When the display is not connected to an AC power or is in 
the standby mode, no signal is output from the RGB/
COMPONENT OUT.

This is the same as the optional adaptor preinstalled in 
the 6 OPTION 1 slot. See page 9.

For details, see the instruction manual of the BKM-
FW50.