Speco ht-intb4 Guía Del Usuario
◈FEATURE
1. Long visible range at night.(50m Max. indoors,
40m Max. outdoors)
2. This camera uses split glass technology to prevent
IR light reflection.
3. This camera has a vari-focal IR lens to prevent
focus drift under IR lighting.
4. The IR cut filter is removed at night to receive
maximum available light.
5. This product is weather resistant to resist rain,
snow and other environmental factors. (IP65)
6. This product is made of corrosion-free materials to
resist rust and corrosion for extended periods of
time.
time.
7. The built-in sunshield helps the camera produce
clear pictures under a variety of lighting conditions.
8. Power & video cables are concealed for extra
security. (Cable through the mount).
9. Unique bracket allows the camera to be fully
adjustable from both wall and ceiling mounting
positions.
positions.
10. Dual voltage operation. You can connect 24V AC
or 12V DC regardless of polarity. The Line-Lock
function is available when you use 24V AC power.
function is available when you use 24V AC power.
11. The IR output level is adjustable to suit any lighting
condition.
12. DNR (Digital Noise Reduction)
By using this DSP chip and associated technology,
the amount of low light noise has been significantly
reduced, and the signal-to-noise ratio (S/N) and
horizontal resolution has been improved resulting
in a clear and sharp image display even in low light
conditions.
the amount of low light noise has been significantly
reduced, and the signal-to-noise ratio (S/N) and
horizontal resolution has been improved resulting
in a clear and sharp image display even in low light
conditions.
13. Horizontal Resolution of 600 TV Lines
Clear image quality has been achieved by em-
ploying a 1/3" SONY Super HAD CCD Ⅱ with
410,000 pixels, which provides a horizontal res-
olution of 600 TV lines.
ploying a 1/3" SONY Super HAD CCD Ⅱ with
410,000 pixels, which provides a horizontal res-
olution of 600 TV lines.
14. True day/night ICR exchange of 2 Filters
This camera has a function that automatically
selects the mode that is appropriate for daytime or
night-time conditions. The COLOR mode operates
in daytime conditions to provide optimum colors,
and the BW mode operates in night-time condi-
tions to enhance the definition of the image.
selects the mode that is appropriate for daytime or
night-time conditions. The COLOR mode operates
in daytime conditions to provide optimum colors,
and the BW mode operates in night-time condi-
tions to enhance the definition of the image.
15. PRIVACY function(12 programmable zones per screen))
The privacy zone function makes it possible to
mask specific areas of the scene from view.
mask specific areas of the scene from view.
16. Digital Zoom
This camera has a Digital Zoom (limit 16X)
◐DIMENSION
◈CONFIGURATION
◈WALL MOUNT INSTALLATION #1
1. Make a hole Ø30mm in diameter for routing cable.
2. Using the mounting plate, drill four holes on the wall.
3. Insert the anchors.
4. Attach the screws.
2. Using the mounting plate, drill four holes on the wall.
3. Insert the anchors.
4. Attach the screws.
◈WALL MOUNT INSTALLATION #2
1. Adjust horizontal angle.
1) Loosen the bolt to adjust the horizontal angle of
the camera.
2) Use the WRENCH to tighten the bolt after adjusting
the camera.
2. Adjust vertical angle
1) Loosen a bolt to adjust vertical angle of the camera.
2) Use the WRENCH to tighten a bolt after adjusting
2) Use the WRENCH to tighten a bolt after adjusting
the camera.
Speco Technologies is constantly developing product
improvements. We reserve the right to modify product design
and specifications without notice and without incurring any
obligation.
Rev. 7/7/10.
HTINTB4
◈CEILING MOUNT INSTALLATION #1
1. Make a hole Ø30mm in diameter for routing cable.
2. Using the mounting plate, drill four holes on the ceiling.
3. Insert the anchors.
4. Attach the screws.
2. Using the mounting plate, drill four holes on the ceiling.
3. Insert the anchors.
4. Attach the screws.
◈CEILING MOUNT INSTALLATION #2
1. Adjust horizontal angle.
1) Loosen the bolt to adjust the horizontal angle of
the camera.
2) Use the WRENCH to tighten the bolt after adjusting
the camera.
2. Adjust vertical angle
1) Loosen the bolt to adjust the vertical angle of the
camera.
2) Use the WRENCH to tighten a bolt after adjusting
the camera.