Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Spectralink
  4. E340
  5. Folleto

Spectralink E340 Folleto

Descargar
Página de 13
 
 
PN: 72-9954-00-B.doc 
Page 10 
Security Settings 
Enable WPA/WPA2 security mode. 
Configuring WPA/WPA2 TKIP through the CLI when NetLink wireless 
telephones are configured for WPA-PSK 
To configure WPA-TKIP (PSK) as security option, use the following commands 
admin>network 
admin(network)>wlan 
admin(network.wlan)>set enc 1 tkip 
admin(network.wlan)>set tkip phrase 1 12345678 
admin(network.wlan)>save 
 
Configuring WPA/WPA2 TKIP through the Web interface when NetLink 
wireless telephones are configured for WPA-PSK 
1.  In the WS 2000 applet navigation pane, double-click 
WLAN1
, and then click 
WLAN1 
Security
. 
2.  Click the 
WPA/WPA2-TKIP
 option, and click the 
WPA/WPA2-TKIP Settings
 button. 
The 
WPA/WPA2-TKIP Settings
 dialog box will appear. 
 
The WS 2000 Wireless Switch supports mixed-mode operation of WPA-
TKIP and WPA2-TKIP. The steps below enable WPA-TKIP by default. 
WPA-TKIP was used for VIEW Certification testing.