Star Micronics SP2000 Guía Del Usuario
– 16 –
ENGLISH
4 Place the ribbon cartridge in the
direction shown in Fig. 6-10 and
press it down to load it. If loading of
the ribbon cartridge is not satisfac-
tory, press down the cartridge while
rotating the ribbon feed knob in the
direction of the arrow.
press it down to load it. If loading of
the ribbon cartridge is not satisfac-
tory, press down the cartridge while
rotating the ribbon feed knob in the
direction of the arrow.
5 Turn the ribbon feed knob of the
ribbon cartridge in the direction of
the arrow to remove slack in the
ribbon.
the arrow to remove slack in the
ribbon.
6 Close the Auto Cutter.
7 Mount the cover by reversing the
7 Mount the cover by reversing the
procedure outlined in step 2 above.
8 When removing the ribbon cartridge,
raise the A section and then remove
it by holding the B section as shown
in Fig. 6-11.
it by holding the B section as shown
in Fig. 6-11.
Fig. 6-10 Loading the ribbon cartridge
Fig. 6-11 Removing the ribbon cartridge
Ribbon separater
Print head
Ink ribbon
Ribbon
feed knob
feed knob
Notched
part
part
Ribbon
cartridge
cartridge
A
B
Auto cutter