Sunpentown wa-1011s Guía Del Usuario
3
NOTE: For some models, the
power supply cord with this air
conditioner contains a current
detection device designed to
reduce the risk of fire. Please refer
to the section “Operation of
Current Device” for details. In the
event that the power supply cord
is damaged, it cannot be repaired
– it must be replaced with a cord
from the Product Manufacturer.
power supply cord with this air
conditioner contains a current
detection device designed to
reduce the risk of fire. Please refer
to the section “Operation of
Current Device” for details. In the
event that the power supply cord
is damaged, it cannot be repaired
– it must be replaced with a cord
from the Product Manufacturer.
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong
circumstances, cut,
remove or bypass the
grounding prong
Power supply cord with 3-prong
grounding plug and current detection
device
grounding plug and current detection
device
WARNING – For Your Safety
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
liquids in the vicinity of this or any other appliance.
Avoid fire hazard or electric shock. Do not use an extension cord
or an adaptor plug. Do not remove any prong from the power
cord.
or an adaptor plug. Do not remove any prong from the power
cord.
WARNING – Electrical Information
Be sure the electrical service is adequate for the model you have
chosen. This information can be found on the serial plate, which
is located on the side of the cabinet and behind the grille.
chosen. This information can be found on the serial plate, which
is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize the
shock and fire hazards, proper grounding is important. The power
cord is equipped with a three-prong grounding plug for protection
against shock hazards.
shock and fire hazards, proper grounding is important. The power
cord is equipped with a three-prong grounding plug for protection
against shock hazards.
Your air conditioner must be used in a properly grounded wall
receptacle. If the wall receptacle you intend to use is not
adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualified electrician install the proper receptacle.
receptacle. If the wall receptacle you intend to use is not
adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualified electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.
This could result in mechanical damage within the air conditioner.
This could result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
Operation of Current Device
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will
notice a click as the RESET button pops out.
3. Press the RESET button and you will notice another click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products, this is also
4. The power supply cord is now supplying electricity to the unit. (On some products, this is also
indicated by a light on the plug head.)
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply must be replaced if it fails to reset when TEST button is pushed or when it cannot be
reset. A new one can be obtained from the product manufacturer.
reset. A new one can be obtained from the product manufacturer.
NOTE: This air conditioner is designed to operate under condition as follows:
Outdoor temp
64~109°F (T
1
Environment)
Cooling operation
Indoor temp
62~89°F (T
1
Environment)
Note: Performance may be reduced outside of these operating temperatures.