KYOCERA FS-1800 Manual De Usuario

Using the Operator Panel

1-16

1 — Software Version

This information shows the firmware version and date of issue of the 

printer.

2 — Hardware Information

This information shows various printer settings, such as the size and type 

of the paper in the paper cassettes.

3 — Memory

This shows the amount of total memory installed in the printer, the 

amount of currently available memory, and the current status of the RAM 

disk. See 

4 — Page Information

This shows the print resolution, number of copies, and the total page count.

5 — Installation Options

This shows the option(s) installed in the printer.

6 — Network Status

This shows the IP address, Subnet Mask address, and Default Gateway 

address for the network interface card installed in the printer.

7 — Emulation

This shows all available emulations of the printer. The printer is shipped 

from the factory with PCL 6 emulation selected as the default.

8 — Error Log

This shows the last three instances of the following four types of errors, 

listing them in the order of their occurrence: KPDL Error Press GO; 
Memory overflow Press GO; Print overrun Press GO; File not 
found Press GO. The most recent error is displayed on the top line of the 

Error Log. For error remedies, see section 

. Error information is cleared when the printer's power is turned off.

9 — Toner Gauge

This shows the approximate level of remaining toner. When the value is 

100, the toner container is full.