LG CS12AQ Guía De Operación

Eco Eye operation controls airflow by sensing the position of 
residents.

Each time the button is pressed, the mode is shifted in the direction of the arrow.

• This feature can be used in cooling and heating mode. 

Pushing the horizontal vane control or vertical louver control button make to cancel the Eco Eye
Operation

• Eco Eye operation is not activated during Moisture Cooling and Sleep Mode.
• Sensor detection sensitivity is different according to the position of indoor unit, movement of objects,

temperature range etc.(The object very different from the surrounding temperature can be mistakenly
detected.) 

• Heat emitting objects such as TV, monitor can be mistakenly detected as people. Pets, fluttering curtains,

sunlight, reflected light etc are also mistakenly detected.

• Energy Saving mode can be occurred because of s

e

nsing uncorrectly depending on the thickness of clothes.  

• It goes into Energy Saving mode if there are no people in the detecting area for 20 minutes.
• Energy Saving mode set setting temperature maximum +2°C during cooling, and maximum -2°C

during heating.

• When surrounding temperature is high(approximately over 28°C), Eco Eye Operation and Eco Eye

Energy Saving Mode is not activated.

• While Energy Saving Cooling mode operate, Eco Eye Energy Saving mode isn't activated. 

While Eco Eye at heating mode operates, horizontal vane will be stopped at the angle of maximum
airflow.

ECO EYE

- Do not locate large objects, heating units, or humidifiers near the "Eco Eye Sensor".

It can make the "Eco Eye Sensor" detect objects incorrectly.

- Do not hit the "Eco Eye Sensor". The "Eco Eye Sensor" can be damaged or malfunction.