Matrox QID-P256PROF Manual De Usuario
Matrox QID Series – User Guide
15
4
Connect audio output
Typically, the audio output from a computer
comes from speakers connected to your
computer. If you prefer, you can hear or
record the sound output from your
computer using the same TV or video
recorder you connect to your graphics card.
To do this, you need an audio cable with a
stereo jack on one end and two RCA
connectors on the other end. If you don’t
have this type of cable, you can buy one at
most consumer electronics stores.
comes from speakers connected to your
computer. If you prefer, you can hear or
record the sound output from your
computer using the same TV or video
recorder you connect to your graphics card.
To do this, you need an audio cable with a
stereo jack on one end and two RCA
connectors on the other end. If you don’t
have this type of cable, you can buy one at
most consumer electronics stores.
a
Plug the stereo-jack end of the audio
cable into the
cable into the
LINE OUT
*
(
)
connector on your computer.
b
Plug the other end of the cable into the
left (
left (
L
) and right (
R
)
AUDIO IN
connectors of your video device. For
more information, see your sound card
manual.
more information, see your sound card
manual.
SCART information
Some video devices in Europe only have SCART connectors. This type of connector includes video
and audio, whereas composite or S-video connectors include only video.
and audio, whereas composite or S-video connectors include only video.
If your video devices only have SCART connectors, you need SCART cables to connect to your Matrox
product. If you want to use SCART cables, contact your Matrox representative.
product. If you want to use SCART cables, contact your Matrox representative.
* If your computer has no audio
LINE OUT
connector, you can use its
SPKR
(speaker) connector instead. In this case, all your
computer sound output goes to the video device you connected to.
TV or video
recorder
Audio
connectors
connectors