ZyXEL ADSL Prestige 660HW-61 130122.0660HW61 Manual De Usuario
Los códigos de productos
130122.0660HW61
Prestige 660H/HW Series User’s Guide
101
Chapter 7 Wireless LAN Setup
Click Wireless LAN, OTIST to display the next screen.
Figure 36 OTIST
The following table describes the fields in this screen.
Table 25 OTIST
LABEL
DESCRIPTION
Key
Enter the setup key from zero to eight ASCII characters. The default OTIST setup key
is "01234567".
Note: If you change the OTIST setup key here, you must also make the
same change on the wireless client(s).
Yes!
If the Prestige has no wireless security configured, select this checkbox to enable
WPA-PSK security and automatically generate a WPA-PSK key on the Prestige. The
WPA-PSK security settings can then be assigned to the wireless client when you start
OTIST.
Back
Click Back to go to the main wireless LAN setup screen.
Start
Click Start to encrypt the wireless security data using the setup key and have the
Prestige set your wireless adapter to use the same wireless settings as the Prestige.
You must also activate and start OTIST on the wireless client at the same time.
Cancel
Click Cancel to begin configuring this screen again.
7.15.1 Activating OTIST
After you click Start, a dialog box displays the Prestige security mode and the WEP Key or
Pre-Shared Key depending on which mode is configured. Click OK to proceed with the
OTIST setup.
Pre-Shared Key depending on which mode is configured. Click OK to proceed with the
OTIST setup.