LG VK7913NNAQ Manual De Usuario

Descargar
Página de 20
How to use 
Operating vacuum cleaner
Uso 
Uso dell'aspirapolvere
❷ Alarm sound
Allarme acustico
• Alarm will sound when the dust
tank is full or the air filter is
clogged.
• After about 1min 30sec, vacuum
cleaner turn itself off and alarm will
sound.
• Empty the dust tank and reuse the
vacuum cleaner.
• L'allarme suona quando il
contenitore raccoglipolvere è pieno
oppure quando il filtro dell'aria è
ostruito.
• Dopo circa 1 minuto e mezzo,
l'aspirapolvere si spegne ed
emette un allarme.
• Prima di riutilizzare l'apparecchio,
svuotare il contenitore
raccoglipolvere.
❸ Park mode
Modalità di bloccaggio
• To store during vacuuming, for
example to move a small piece of
furniture or a rug, use park mode
to support the flexible hose and
nozzle.
- Slide the hook on the nozzle into
the slot on the side of vacuum
cleaner.
• Per lasciare momentaneamente
l'aspirapolvere, ad esempio per
spostare un mobile o un tappeto,
utilizzare il sistema di bloccaggio
per mantenere il tubo flessibile e la
spazzola.
- Far scorrere il gancio sulla
spazzola nella fessura sul retro
dell'aspirapolvere.
❹ Storage
Conservazione
• When you have switched off and
unplugged the vacuum cleaner,
press the cord  reel button to
automatically rewind the cord.
• You can store your vacuum
cleaner in a vertical position by
sliding the hook on the nozzle
into the slot on the underside of
the vacuum cleaner.
• Dopo aver spento l'aspirapolvere
e averlo staccato dalla presa
elettrica, premere il pulsante per
avvolgere automaticamente il
cavo.
• Possibile conservare
l'aspirapolvere in posizione
verticale facendo scorrere il
gancio posto sulla spazzola nella
fessura sotto l'aspirapolvere.
NOTICE
When alarm sounds : 
1. The dust tank is full
Turn off the vacuum cleaner and empty the dust tank
2. Power is on without the dust tank
Turn of the vacuum cleaner and reattach the dust tank
3. Rotating plate in the dust tank is restricted because obstruction
Turn of the vacuum cleaner and remove obstruction
AVVISO
Se suona l'allarme:
1. Il contenitore raccoglipolvere è pieno
Spegnere l'aspirapolvere e svuotare il contenitore.
2. L'alimentazione è accesa senza contenitore raccoglipolvere
Spegnere l'aspirapolvere e collegare di nuovo il contenitore.
3. La rotazione della piastra nel contenitore della polvere è limitata a
causa dell'ostruzione
Spegnere l'aspirapolvere e rimuovere l'ostruzione.
10
❶ How to operate
Funzionamento
• Pull out the power cord to the desired
length and plug into the socket.
• Press the switch button to start the vacuum
cleaner.
• To stop it, press the switch button again.
• Press the cord reel button to rewind the
power cord after use.
• The flexible hose handle has a manual air
flow regulator which allows you to adjust
suction level briefly.
• Estrarre il cavo di alimentazione per la
lunghezza desiderata e collegarlo alla
presa. 
• Premere l’interruttore per accendere
l’aspirapolvere 
• Per spegnerlo, premere nuovamente
l’interruttore 
• Premere il pulsante dell’avvolgicavo per
avvolgere automaticamente il cavo di
alimentazione dopo l’uso. 
• La maniglia sul tubo flessibile è dotata di
un regolatore  manuale del flusso d’aria
che consente di regolare il livello di
aspirazione.
Plug / Spina elettrica
Switch button
Pulsante l'nterruttore
Cord reel button
Pulsante avvolgicavo
Regulator
Regolatore