LG DP437H Guía Del Usuario

12

C

onnecting

Connect the AUDIO OUT (L/R) on the unit to 2CH 
AUDIO IN on amplifier with Audio cable, such as 
AUDIO Left/Right with white/red.

Rear of the Unit

Receiver /
Amplifier

Audio
Cable

Connect one of the unit’s DIGITAL AUDIO OUT 
(COAXIAL) jacks to the corresponding jack on your 
amplifier.

Rear of the Unit

Receiver /
Amplifier

Coaxial
Cable

 

y If your TV is not capable of handling 96 kHz 

sampling frequency, set the [Sample Freq.] 
option to [48 kHz] on the setup menu. 

 

y If your TV is not equipped with Dolby Digital 

and MPEG decoder, set the [Dolby Digital] and 
[MPEG] options to [PCM] on the setup menu.

 

y Changing the resolution when the unit is 

connected with HDMI connector may result in 
malfunctions. To solve the problem, turn off the 
unit and then turn it on again.

 

y If the audio format of the digital output 

does not match the capabilities of your 
amplifier, the amplifier will produce a strong, 
distorted sound or no sound at all.

 

y To see the audio format of the current disc 

in the on-screen display, press AUDIO.

 

y This unit does not perform internal (2 

channel) decoding of a DTS sound track. 
To enjoy DTS multi channel surround, you 
must connect this unit to a DTS compatible 
amplifier via one of this unit’s digital audio 
outputs.

 

,

Note

Connect the HDMI OUT on the unit to the HDMI IN 
on amplifier with HDMI cable.  
(Type A, High Speed HDMI™ Cable) 
Connect the HDMI OUT jack on amplifier to HDMI 
IN jack on TV with HDMI cable, if the amplifier has 
HDMI OUT jack.

Rear of the Unit

Receiver /
Amplifier

HDMI
Cable

TV

HDMI
Cable

DP437H-PU_MFL67859951_RUS_ENG_1.0.indd   12

2013-01-11     6:42:47