LG LAS655K Guía Del Usuario

18

C

onnecting

For the wireless network connection, the unit needs 
to be set up for network communication. This 
adjustment can be done from the [Settings] menu. 
Adjust the [NETWORK] setting as follow. Setting up 
the access point or the wireless router is required 
before connecting the unit to the network.

Preparation
Before setting the wireless network, you need 
to:

 

- connect the broadband internet to the 

wireless home network.

 

- set the access point or wireless router.

 

- note the SSID and security code of the 

network.

1.  Select [Connection Setting] option in the 

[Settings] menu then press ENTER (b). 

2.  Read the preparations for the network settings 

and then press ENTER (b) while [Start] is 

highlighted.

If wired network is not connected to the unit, all 
available networks are displayed on the screen.

3. Use W/S to select a desired SSID of wireless 

network and press ENTER (b).

If you have security on your access point, you 
need to input the security code as necessary.

If you use other characters than the english 
alphabet or digits for the SSID name of your 
access point or wireless router, it may be 
displayed differently.

 

,

 

 

y WEP security mode generally have 4 keys 

available on an access point setting. If your 
access point or wireless router use WEP 
security, enter the security code of the key 
“No.1” to connect on your home network.

 

y An Access Point is a device that allows you 

to connect to your home network wirelessly.

 

,

4. Use W/S/A/D to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using W/S/

A/D and numerical buttons. If you make a 

mistake while entering a number, press CLEAR 
to clear the highlighted part.

 

,

5.  Select [Next] and press ENTER (b) to apply 

network settings.

Network connection status is displayed on the 
screen.

6.  Select [OK] and press ENTER (b) to complete 

the network connection.