Omnitron iConverter GX/T 8522-0 Prospecto
Los códigos de productos
8522-0
Ordering inFOrmatiOn
Page 2
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. Irvine, CA 92618
iConverter
GX/T
© 2010 Omnitron Systems Technology, Inc. All rights reserved.
iConverter
and
NetOutlook
are Registered Trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-18520-001E
9/10
speciFicatiOns
management
Model Type
GX/T
Protocols
10BASE-T, 100BASE-TX,
1000BASE-T, 1000BASE-SX/LX
UTP Connectors
RJ-45
Fiber Connectors
SC, MT-RJ, LC, Single-Fiber SC
Controls
BP Enable, X-Over, LS/LP, RFD,
SFD, UTP Auto/Man, 10/100/1000,
UTP FDX/HDX, F/O Auto/Man
LED Displays
Power, FO link, UTP link, Auto,
FDX/HDX, 10/100/1000
Dimensions
W:0.85" x D:4.5" x H:2.8"
Weight
8 oz.
Compliance
UL, CE, FCC Class A
Power
Requirement
1.4A @ 3.3VDC (typical)
Temperature
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (hrs)
830,000
Model Type
Fiber /
Media
Type
Distance
Connector Types
Tx
Wavelength
(nm)
Rx
Wavelength
(nm)
Min. Tx
Power
(dBm)
Max. Tx
Power
(dBm)
Min. Rx
Sensitivity
(dBm)
Max. Rx
Sensitivity
(dBm)
Link
Budget
(dBm)
SC
MT-RJ
LC
GX/T
Dual Fiber
MM/DF
220 / 550m
1
8522-0
8524-0
8526-0
850
850
-10
-4
-17
-3
7
SM
12km
8523-1
8525-1
8527-1
1310
1310
-9.5
-3
-19.5
-3
10
SM
34km
8523-2
-
8527-2
1310
1310
-5
0
-23
-3*
18
SM
80km
8523-3
-
8527-3
1550
1550
-5
0
-23
-3*
18
GX/T
Single-Fiber
SM
20km
8530-1
-
-
1310
1550
-9.5
-3
-20
-3
10.5
SM
20km
8531-1
-
-
1550
1310
-9.5
-3
-20
-3
10.5
SM
40km
8530-2
-
-
1310
1550
-3
0
-20
-3*
17
SM
40km
8531-2
-
-
1550
1310
-3
0
-20
-3*
17
For wide temperature (-40 to 60º
C), add a "W" to the end of the model number. Consult factory for extended temperature (-40 to +75º
C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
1
62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
Management is accomplished by using a Network Management
Module (NMM2) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
module can be accessed via SNMP, Telnet, and via a serial port.
The SNMP-based management is accomplished via Omnitron’s
intuitive, graphic-oriented NetOutlook management software
or third party SNMP management software. Management via
the Telnet and the serial interfaces have an easy-to-use,
menu-driven interface.
Some of the real-time GX/T parameters that can be monitored
Some of the real-time GX/T parameters that can be monitored
include duplex mode (Half, Full), link and data receive status.
Other parameters include module type and model, hardware
and software revisions, serial numbers and a user-defined
identifier. The port MIB statistics include transmit and receive
packet counts, error counts, etc.
The network manager can set programmable-only (Soft)
The network manager can set programmable-only (Soft)
parameters and override the module’s physical switch (Hard)
settings remotely via the management software. The Soft
parameters include VLAN map setting and Port Access Control
setting. Some of the Hard switch-selectable parameters
include fiber or UTP auto-negotiation, UTP Half/Full-Duplex,
Link modes and Port Access Control.
The iConverter GX/T supports SNMP trap notification for the
The iConverter GX/T supports SNMP trap notification for the
monitoring and notification of different network events. Specific
GX/T events that generate traps include module insertion and
removal, and port link-up and link-down. Trap monitoring of
specific events can be selectively enabled or disabled by the
network management software.