Viewsonic PJD6352 Manual De Usuario

22

•

If you wish to use a microphone, connect a 3.5 mini jack cable microphone to the 
projector.

•

You can use a wireless microphone as long as a wireless module is attached to the 
projector’s microphone input jack and it works well with the associated devices. To 
ensure a quality use of the wireless microphone, it is recommended that your 
microphone conforms to the specifications listed in the table below. 

•

There are two ways to adjust microphone volumes.

•

Directly set microphone volume levels in the SYSTEM SETTING: 
ADVANCED > Audio Settings > Microphone Volume menu.

•

Set projector volume levels in the SYSTEM SETTING: ADVANCED > Audio 
Settings > Audio Settings > Audio Volume menu, or press 

 (Volume) on the 

remote control. (The projector volume setting will affect the microphone volume.)

•

If the microphone is not working, check the volume setting and cable connection.

•

You might get feedback noise from the microphone when you are too close to the 
speaker of the projector. Move the microphone away from the speaker of the projector. 
The greater volume you require, the greater distance you need to be away from the 
speaker to prevent the noise.

This cable management cover helps you to conceal and organize the cables connected to the 

back of the projector. It is especially useful when the projector is ceiling-mounted or wall-

mounted.

1.

Make sure that all the cables are properly 
connected to the projector.

2.

Attach the cable management cover to the 
back of the projector.

3.

Tighten the screws that secure the cable 
management cover.

Microphone

Transducer Principle

Dynamic

Impedance

300

1K

ohm

Frequency response

600

16k

Hz