Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Viewsonic
  4. PJD5555W
  5. Manual De Usuario

Viewsonic PJD5555W Manual De Usuario

Descargar
Página de 85
35
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned 
on). To use these functions, be sure you have turned on the corresponding menus under 
SOURCE > Standby Settings, and the cable connections are correctly made. For the 
connection methods, see the 
 chapter.
Active VGA Out
Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT 
sockets are correctly connected to devices. The projector outputs the signal received only 
from COMPUTER IN 1. 
Active Audio Out
Selecting On outputs an audio signal when the AUDIO IN and AUDIO OUT sockets are 
correctly connected to devices.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure 
you have made a correct connection to the projector audio input/output jacks. See 
 for more details.
Muting the sound
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > 
Audio Settings > Mute menu.
2.
Press 
/  to select On.
If available, you can press 
 on the remote control to toggle the projector audio between on 
and off.
Adjusting the sound level
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > 
Audio Settings > Audio Volume menu.
2.
Press 
/  to select a desired sound level.
If available, you can press 
 
or 
 
on the remote control to adjust the projector’s sound 
level.
Turning off the Power On/Off Ring Tone
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings > Power On/Off Ring Tone menu.
2.
Press 
/  to select Off.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound 
mute or changing the sound level will not affect the Power On/Off Ring Tone.