Viewsonic PJD7720HD Manual De Usuario
28
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to
angled projection.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following one of these steps.
•
Using the remote control
1.
Press
/
/ / to display the Keystone
correction page.
2.
Press
to correct keystoning at the top of
the image. Press
to correct keystoning at
the bottom of the image. Press to correct
keystoning at the right side of the image.
Press to correct keystoning at the left side
of the image.
keystoning at the right side of the image.
Press to correct keystoning at the left side
of the image.
•
Using the OSD menu
For PJD6252L/PJD6551W/PJD7720HD:
1.
1.
Open the OSD menu and go to the
DISPLAY >
Keystone menu.
2.
Press Enter. The Keystone correction page is displayed.
3.
Press
to correct keystoning at the top of the image or press
to correct
keystoning at the bottom of the image.
For PJD7326/PJD7526W:
1.
1.
Open the OSD menu and go to the
DISPLAY >
Keystone menu.
2.
Press Enter. The Keystone correction page is displayed.
3.
Highlight Vertical and press
to correct keystoning at the top of the image or press
to correct keystoning at the bottom of the image.
4.
You can also highlight Horizontal and press to correct keystoning at the right side
of the image. Press to correct keystoning at the left side of the image.
of the image. Press to correct keystoning at the left side of the image.
Press
/
Press
/
Press
/
Press
/
(PJD7326/PJD7526W
only)