Viewsonic PJD7720HD Manual De Usuario
62
3.
Highlight Power Saving and press
/ .
4.
When Enable is selected, the projector lamp will be changed to Eco
mode after no signal is detected for 5 minutes.
mode after no signal is detected for 5 minutes.
The lamp power will be changed to SuperEco mode after no
signal is detected for 20 minutes.
signal is detected for 20 minutes.
Timing of replacing the lamp
Please install a new lamp or consult your dealer when the Lamp indicator light lights up.
An old lamp may cause a malfunction in the projector and in some instances the lamp may
explode.
CAUTION
The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or
Temperature indicator light still lights up after turning the power back on, please contact your
dealer. See
The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or
Temperature indicator light still lights up after turning the power back on, please contact your
dealer. See
for details.
Replacing the lamp
Turn the power off and disconnect the projector from the power outlet. Please contact
qualified service personnel for changing the lamp.
qualified service personnel for changing the lamp.
Type number:
•
PJD6252L: RLC-092
•
PJD6551W: RLC-093
•
PJD7326: RLC-104
•
PJD7526W: RLC-105
•
PJD7720HD: RLC-100