Sony SFM2 Manual

SFM2 

 

 

 

Page - 10 -  

Installation Manual 

NOTE:  For clarity purposes, the following illustrations will be shown without the adapter plate and display 

attached. This must be done to show how the positioning of the backplate cover and the backplate 
relate to each other (connection-wise). 

1.  The flange opening must be facing up.  
2.  Raise the flat panel with the front plate attached and slide the top flange opening to the flange on the 

backplate (Figure 7).  

3.  Slide the monitor down slowly. Make sure the backplate flange captures the frontplate top flange opening 

before letting go of the monitor. Slide down and push in (Figure 8).  

4.  To secure the two plates, tighten the two (2) M6 x 12 (mm) security screws using a long Phillip head 

screwdriver (Figure 9).  

 

Figure 7 

 

 

Figure 8 

Figure 9 

 

Flange 

Frontplate 

Backplate 

Flange Opening 
(Slot opening 
on top of 
frontplate) 

Simulated Display 

M6 x 12mm 
Security Screws