Sony SRSX11 Manual
English
Manuals Supplied
Startup Guide (this document)
Provides you with instructions on how to connect the
unit with BLUETOOTH devices and basic operations.
unit with BLUETOOTH devices and basic operations.
Reference Guide
Provides you with precautions and product
specifications.
specifications.
Help Guide
Read the Help Guide on your computer or smartphone
when you want to know how to use the unit in greater
detail. The Help Guide also contains a troubleshooting
guide which provides you with remedies for the
problems you might encounter.
when you want to know how to use the unit in greater
detail. The Help Guide also contains a troubleshooting
guide which provides you with remedies for the
problems you might encounter.
URL:
http://rd1.sony.net/help/speaker/srs-x11/h_zz/
Two-dimensional code:
Charging the Unit
This unit has a built-in lithium-ion rechargeable battery. Charge
the battery before using the unit for the first time.
When the unit is turned off and connected to a booted PC or an AC
outlet, the CHARGE indicator lights up in orange. The CHARGE
indicator will turn off when charging is completed.
The charging time depends on the power output capacity of the
connected device.
the battery before using the unit for the first time.
When the unit is turned off and connected to a booted PC or an AC
outlet, the CHARGE indicator lights up in orange. The CHARGE
indicator will turn off when charging is completed.
The charging time depends on the power output capacity of the
connected device.
Power output capacity
Estimated charging time*
Ability to output in 1.5 A
About four hours
Ability to output in 500 mA
About eight hours
* The time stated above may vary depending on the ambient
temperature or conditions of use.
Hint
A unit that is in use can be charged if it is connected to a booted PC or
an AC outlet, though the CHARGE indicator does not light up. In this
case, it may take longer to charge its battery than the ones stated
above depending on the conditions of use. Therefore, it is
recommended to turn off the unit when charging.
an AC outlet, though the CHARGE indicator does not light up. In this
case, it may take longer to charge its battery than the ones stated
above depending on the conditions of use. Therefore, it is
recommended to turn off the unit when charging.
To charge the battery from a PC
Micro-USB cable (supplied)
DC IN
Lit
(orange)
(orange)
Hint
The power output capacity varies depending on the PC. For details on
your PC’s power output, refer to the operating instructions supplied
with your PC.
your PC’s power output, refer to the operating instructions supplied
with your PC.
To charge the battery from an AC outlet
USB AC adaptor
(commercially-available)
(commercially-available)
Micro-USB cable (supplied)
DC IN
Lit
(orange)
(orange)
Hint
A commercially-available USB AC adaptor with a power output of 1.5 A
or more is recommended for use, though a USB AC adaptor with a
power output of more than 500 mA, but less than 1.5 A is also
compatible with the unit. Charging using other types of adaptors is not
covered by the warranty.
or more is recommended for use, though a USB AC adaptor with a
power output of more than 500 mA, but less than 1.5 A is also
compatible with the unit. Charging using other types of adaptors is not
covered by the warranty.
How to Make a Wireless Connection with
BLUETOOTH Devices
BLUETOOTH Devices
Select your case from the three pairing types below. BLUETOOTH
devices need to be “paired” with each other beforehand.
devices need to be “paired” with each other beforehand.
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device
The unit can be paired with up to eight BLUETOOTH devices. When
pairing with two or more BLUETOOTH devices, perform the
following pairing procedure for each device.
pairing with two or more BLUETOOTH devices, perform the
following pairing procedure for each device.
1
Press the
(power) PAIRING button to turn on
this unit.
The (BLUETOOTH) indicator begins to flash.
Flashing
(white)
(white)
2
Press and hold the
(power) PAIRING button
until beeps are heard and the (BLUETOOTH)
indicator begins to flash quickly.
indicator begins to flash quickly.
The unit enters pairing mode.
Hint
When you turn on the unit for the first time, it enters pairing mode
automatically.
automatically.
Fast flashing
(white)
(white)
3
Perform the pairing procedure on the BLUETOOTH
device to detect this unit.
device to detect this unit.
When a list of detected devices appears on the display of the
BLUETOOTH device, select “
BLUETOOTH device, select “
SRS-X11.”
If passkey input is required on the display of a BLUETOOTH
device, input “
device, input “
0000
.”
4
Make the BLUETOOTH connection from the
BLUETOOTH device.
BLUETOOTH device.
When the BLUETOOTH connection is established, the
(BLUETOOTH) indicator on the unit stays lit.
Connecting with a paired
BLUETOOTH device
BLUETOOTH device
1
Turn on this unit.
The (BLUETOOTH) indicator begins to flash.
2
Make the BLUETOOTH connection from the
BLUETOOTH device.
BLUETOOTH device.
When the BLUETOOTH connection is established, the
(BLUETOOTH) indicator on the unit stays lit.
Connecting with a smartphone by
One-touch (NFC)
One-touch (NFC)
By touching the unit with a smartphone, the unit is turned on
automatically and then proceeds to pairing and BLUETOOTH
connection.
automatically and then proceeds to pairing and BLUETOOTH
connection.
Compatible smartphones
NFC-compatible smartphones with Android 2.3.3 or later installed
NFC
NFC (Near Field Communication) is a technology enabling
short-range wireless communication between various devices,
such as smartphones and IC tags. Thanks to the NFC function, data
communication - for example, BLUETOOTH pairing - can be
achieved easily by simply touching NFC-compatible devices
together (i.e., at the N-Mark symbol or location designated on
each device).
short-range wireless communication between various devices,
such as smartphones and IC tags. Thanks to the NFC function, data
communication - for example, BLUETOOTH pairing - can be
achieved easily by simply touching NFC-compatible devices
together (i.e., at the N-Mark symbol or location designated on
each device).
1
Set the NFC function of the smartphone to on.
For details, refer to the operating instructions supplied with
the smartphone.
• If your smartphone OS is Android 2.3.3 or later and less than
the smartphone.
• If your smartphone OS is Android 2.3.3 or later and less than
Android 4.1, proceed to step 2.
• If your smartphone OS is Android 4.1 or later, proceed to step 4.
2
Download and install the app “NFC Easy Connect.”
“NFC Easy Connect” is a free Android app you can download
from Google Play.
Download the app by searching for “NFC Easy Connect” or
access it by using the following two-dimensional code. Fees
may be charged for downloading the app.
from Google Play.
Download the app by searching for “NFC Easy Connect” or
access it by using the following two-dimensional code. Fees
may be charged for downloading the app.
To download by the two-dimensional
code, use a two-dimensional code
reader app.
code, use a two-dimensional code
reader app.
Note
The app may not be available in some countries and/or regions.
3
Start “NFC Easy Connect” on the smartphone.
Make sure that the app screen is displayed.
4
Touch this unit with the smartphone.
Unlock the screen of the smartphone beforehand.
Keep touching the smartphone on the N marked part of the
unit until the smartphone responds. If the unit is off, it will
turn on when the smartphone touches it.
Keep touching the smartphone on the N marked part of the
unit until the smartphone responds. If the unit is off, it will
turn on when the smartphone touches it.
Smartphone responds
(unit recognized)
(unit recognized)
Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, the
When the BLUETOOTH connection is established, the
(BLUETOOTH) indicator on the unit stays lit.
To disconnect, touch the unit with the smartphone again.
Hints
If you cannot connect the unit, try the following.
• Start the app on the smartphone and move the smartphone
• Start the app on the smartphone and move the smartphone
slowly over the N marked part of the unit.
• If the smartphone is in a case, remove it from the case.
• Make sure that the app screen is displayed on the smartphone.
• Make sure that the app screen is displayed on the smartphone.
Listening and Calling
Operate the unit after making the BLUETOOTH connection with your
BLUETOOTH device.
BLUETOOTH device.
Listening to music
Profile: A2DP, AVRCP
Start playback on the BLUETOOTH device and adjust the
volume.
volume.
Set the volume at an appropriate level on the connected device
and adjust the volume with the VOL –/+ buttons on the unit.
and adjust the volume with the VOL –/+ buttons on the unit.
The VOL + button has a tactile dot.
Hint
For details concerning playback through connection via the AUDIO IN
jack, refer to the Help Guide.
jack, refer to the Help Guide.
Making a call/Receiving a call
Profile: HSP, HFP
Operate your smartphone to make a call.
To terminate a call, press the
(call) button on the unit.
Press the (call) button on the unit when an incoming
call arrives.
call arrives.
Operate in the same way when an incoming call arrives while you
are listening to music.
are listening to music.
The
(call) button has a tactile dot.
Microphone
Hint
When a portable audio device, etc. is connected to the AUDIO IN jack,
the unit automatically switches to the AUDIO IN mode. In this case,
sound from the BLUETOOTH-connected device is not output from the
unit, but handsfree calling is available.
the unit automatically switches to the AUDIO IN mode. In this case,
sound from the BLUETOOTH-connected device is not output from the
unit, but handsfree calling is available.
Connecting Two Speakers and a
BLUETOOTH Device (Speaker Add
Function)
BLUETOOTH Device (Speaker Add
Function)
By connecting two SRS-X11 units via BLUETOOTH, you can select
audio reproduction between the stereo mode (stereo sound) and
double mode (same sound is output from two units
simultaneously). To use this function, two SRS-X11 units are
required.
audio reproduction between the stereo mode (stereo sound) and
double mode (same sound is output from two units
simultaneously). To use this function, two SRS-X11 units are
required.
1
Bring two SRS-X11 units within 1 m (3 ft) of each
other.
other.
2
Press the
(power) PAIRING button on one of
the units to turn on.
The (BLUETOOTH) indicator of the unit begins to flash.
3
Press and hold the ADD button on the unit where
the
the
(power) PAIRING button is pressed in step
2 until you hear beeps.
The (BLUETOOTH) and L/R indicators flash. A beep will then
be heard when the R indicator lights up while the
be heard when the R indicator lights up while the
(BLUETOOTH) and L indicators keep flashing.
4
Once the R indicator of the unit that is operated in
step 3 has been lit, press the
step 3 has been lit, press the
(power) PAIRING
button on the other unit to turn on.
The (BLUETOOTH) indicator of the unit begins to flash.
5
Press and hold the ADD button on the unit where
the
the
(power) PAIRING button is pressed in step
4 until you hear beeps.
The (BLUETOOTH) and L/R indicators flash. The L indicator
then lights up while the (BLUETOOTH) and the R indicators
turn off.
then lights up while the (BLUETOOTH) and the R indicators
turn off.
Hint
In some cases, the L indicator may light up right after the ADD
button was pressed and held depending on the condition of the
BLUETOOTH connection.
button was pressed and held depending on the condition of the
BLUETOOTH connection.
6
Press the ADD button repeatedly on the unit where
the (BLUETOOTH) indicator is flashing to change
audio reproduction between the stereo mode and
double mode.
the (BLUETOOTH) indicator is flashing to change
audio reproduction between the stereo mode and
double mode.
The L/R indicators on both units show the status of audio
reproduction.
reproduction.
Stereo mode (L ch/R ch)
Stereo mode (R ch/L ch)
Double mode (monaural/monaural)
7
Operate the unit where the (BLUETOOTH)
indicator is flashing to make a BLUETOOTH
connection with a BLUETOOTH device.
indicator is flashing to make a BLUETOOTH
connection with a BLUETOOTH device.
For details on the BLUETOOTH connection, see “Pairing and
connecting with a BLUETOOTH device” (steps 2, 3 and 4) or
“Connecting with a smartphone by One-touch (NFC)” on this
document.
When the (BLUETOOTH) indicator of the unit stops flashing
and lights up, the BLUETOOTH connection is established.
connecting with a BLUETOOTH device” (steps 2, 3 and 4) or
“Connecting with a smartphone by One-touch (NFC)” on this
document.
When the (BLUETOOTH) indicator of the unit stops flashing
and lights up, the BLUETOOTH connection is established.
Hints
• When making or receiving a call, only operate the unit where the
(BLUETOOTH) indicator is lit.
• If a portable audio device, etc. is connected to the AUDIO IN jack, the
unit automatically switches to AUDIO IN mode, and the speaker add
function is terminated.
function is terminated.
• When the unit that had been used as the speaker add function the
last time is turned on, the unit will try to establish the speaker add
function with the other unit that had been connected. If you want to
use two SRS-X11 units as the speaker add function again, turn the
other unit on.
function with the other unit that had been connected. If you want to
use two SRS-X11 units as the speaker add function again, turn the
other unit on.
• If you want to use the unit that had been used as one of the units of
the speaker add function by itself, press the
(power) PAIRING
button to turn on the unit, then press and hold the ADD button until a
beep is heard to terminate the speaker add function since the unit
tries to establish the last-made connection.
beep is heard to terminate the speaker add function since the unit
tries to establish the last-made connection.
• For details about the speaker add function, refer to the Help Guide.
• The BLUETOOTH® word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sony Corporation is under
license.
license.
• The N Mark is a trademark or registered trademark of NFC Forum, Inc.
in the United States and in other countries.
• Android™ and Google Play™ are trademarks of Google Inc.
• Other trademarks and trade names are those of their respective
• Other trademarks and trade names are those of their respective
owners.
Personal Audio
System
Startup Guide
Guía de inicio
4-565-374-
91(1)
©2015 Sony Corporation Printed in China
SRS-X11