Sony HCD-S500 Manual
59
Other Operations
Controlling the TV
You can control your TV using the buttons
below.
below.
By pressing
You can
TV [/1
Turn the TV on or off.
TV/VIDEO
Switch the TV’s input source
between the TV and other input
sources.
between the TV and other input
sources.
Switching between TV and DVD
Using the CONTROL DVD/TV switch, you
can switch the remote signal between
control of the TV and control of the DVD
unit. When you watch the DVD, ensure that
you have the CONTROL DVD/TV switch
set to DVD.
can switch the remote signal between
control of the TV and control of the DVD
unit. When you watch the DVD, ensure that
you have the CONTROL DVD/TV switch
set to DVD.
The table below shows the buttons that are
affected by the CONTROL DVD/TV switch.
affected by the CONTROL DVD/TV switch.
Button
DVD
TV
1~9,**
Standard number
Regardless of
>10,
button function
the number
10/0
for DVD.
button pressed,
the channel
advances in
numerical order.
the channel
advances in
numerical order.
ENTER
Standard enter
Skips to channel
function for
12.
DVD.
.
Standard
CH –
preceding title,
chapter skip
function for
DVD.
chapter skip
function for
DVD.
>
Standard forward CH +
title, chapter
skip for DVD.
title, chapter
skip for DVD.
3
VOL +
VOL +
#
VOL –
VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
your TV or to use some of the buttons above.
* Use the number buttons only to enter the code
number of controllable TVs.
** For double digit number, press >10, then the
number. (For example, press >10, then 2 and 5 for
entering 25.)
entering 25.)
FUNCTION
Watching the Video or
other Unit
other Unit
You can use VCRs or other units connected
to the VIDEO 1 or VIDEO 2 jacks. Refer to
the operation manual supplied with the unit
for farther information on the operation.
to the VIDEO 1 or VIDEO 2 jacks. Refer to
the operation manual supplied with the unit
for farther information on the operation.
Press FUNCTION repeatedly until
VIDEO 1 or VIDEO 2 that you connected
the unit to appears on the front panel
display.
VIDEO 1 or VIDEO 2 that you connected
the unit to appears on the front panel
display.
Each time you press FUNCTION, the mode
of the system changes in the following
sequence.
DVD
of the system changes in the following
sequence.
DVD
t VIDEO 1 t VIDEO 2 t
TUNER
t DVD...
1
2
3
4
5
6
7
>10
10/0
8
9