Sony DSC-R1 Manual
95
Us
in
in
g y
o
o
u
r c
o
m
pute
r
Using your Macintosh computer
You can copy images to your computer and
create a video CD using “ImageMixer
VCD2” (supplied).
create a video CD using “ImageMixer
VCD2” (supplied).
Recommended environment for
copying images
copying images
OS (pre-installed): Mac OS 9.1, 9.2, or Mac
OS X (v10.0 or later)
USB connector: Provided as standard
Recommended environment for using
“ImageMixer VCD2”
“ImageMixer VCD2”
OS (pre-installed): Mac OS X (v10.1.5 or
later)
CPU: iMac, eMac, iBook, PowerBook, Power
Mac G3/G4/G5 series, Mac mini
Memory: 128 MB or more (256 MB or more
is recommended.)
Hard Disk: Disk space required for
installation—approximately 250 MB
Display: 1024 × 768 dots or more,
32,000 colors or more
• QuickTime 4 or later must be pre-installed.
(QuickTime 5 or later is recommended.)
Recommended environment for using
“Image Data Converter SR Ver.1.0”
“Image Data Converter SR Ver.1.0”
OS (pre-installed): Mac OS X (v10.3-10.4)
CPU: iMac, eMac, iBook, PowerBook, Power
Mac G4/G5 series, Mac mini
Memory: 256 MB or more (512 MB or more
is recommended.)
Display: 1024 × 768 dots or more,
32,000 colors or more
Notes on connecting your camera to a
computer
computer
• Operations are not guaranteed for all the
recommended computer environments
mentioned above.
mentioned above.
• If you connect two or more USB devices to a
single computer at the same time, some devices,
including your camera, may not operate
depending on the types of USB devices you are
using.
including your camera, may not operate
depending on the types of USB devices you are
using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface
that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection
when connecting a computer, [Auto] (default
setting), [Mass Storage] and [PTP] modes. This
section describes the [Auto] and [Mass Storage]
as examples. For details on [PTP], see page 81.
setting), [Mass Storage] and [PTP] modes. This
section describes the [Auto] and [Mass Storage]
as examples. For details on [PTP], see page 81.
• When your computer resumes from the suspend
or sleep mode, communication between your
camera and your computer may not recover at
the same time.
camera and your computer may not recover at
the same time.
1
Prepare the camera and a
Macintosh computer.
Macintosh computer.
Perform the same procedure as that
described in “Stage 2: Preparing the
camera and the computer” on page 86.
described in “Stage 2: Preparing the
camera and the computer” on page 86.
2
Connect the USB cable.
Perform the same procedure as that
described in “Stage 3: Connecting the
camera and your computer” on page 87.
described in “Stage 3: Connecting the
camera and your computer” on page 87.
Recommended computer
environment
environment
Copying and viewing images on
a computer
a computer