Sony XM-475GSX Guia De Especificaciones

Design and Specifications subject to change without notice.

•

 800W max power

•

 75W x 4/200W x 2 into 4 W, 20Hz-20kHz, @ 0.04% THD

•

 100W x 4 into 2 W, 20Hz-20kHz, @ 0.1% THD

• Differential FET Input Stage
• MOSFET Outputs
• MOSFET Power Supply
• Variable 50-300Hz Hi/Low Pass Filters
• Dual Mode capability
• 40Hz EQ Boost
• RCA & Speaker Level Inputs

•

 Indicates step-up

POWER OUTPUT AND TOTAL HARMONIC DISTORTION
75 watts per channel minimum continuous average power into 4 ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee Standards.

Circuit system 

OTL (output transformerless) circuit
Pulse power supply

Inputs 

RCA pin jacks
High level input connector

Outputs 

Speaker terminals

Speaker impedance 

2 – 8 W (stereo)
4 – 8 W (when used as a bridging amplifier)

Maximum outputs 

Four speakers: 170 W × 4 (at 4 W)
Three speakers: 170 W × 2 + 400 W × 1 (at 4 W)
Two speakers: 400 W × 2 (at 4 W)

Rated outputs (supply voltage at 14.4 V)

Four speakers:

75 W × 4 (20 Hz – 20 kHz, 0.04% THD, at 4 W)

100 W × 4 (20 Hz – 20 kHz, 0.1% THD, at 2 W)

Two speakers:

200 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 4 W)

Frequency response 

5 Hz – 50 kHz (+0.5 dB, -3 dB)

Harmonic distortion 

0.005% or less (at 1 kHz)

Input level adjustment range

0.2 – 6.0 V (RCA pin jacks)
0.4 – 12 V (High level input)

High-pass filter 

50 – 300 Hz, –12 dB/oct

Low-pass filter 

50 – 300 Hz, –12 dB/oct

Low boost 

0 – 10 dB (40 Hz)

Power requirements 

12 V DC car battery (negative ground)

Power supply voltage 

10.5 – 16 V

Current drain 

at rated output: 40 A (4 W)
Remote input: 1.5 mA

Dimensions 

Approx. 358 × 50 × 264 mm (w/h/d) (14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls

Mass 

Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories

Supplied accessories 

Mounting screws (4)