Sony SDM-P232W Manual
3
(US)
US
Connecting your monitor
Connect your monitor to a computer or other equipment.
1
Remove the back cover.
2
Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3
Connect the supplied power cord to the monitor’s
AC IN connector.
AC IN connector.
4
Connect the power cord to a power outlet.
Note
For details on securing the cords, refer to the Operating Instructions on the
CD-ROM.
CD-ROM.
Turning on the monitor and
computer
computer
Turn on your monitor first, then a computer.
1
Press the MAIN POWER switch on the right side of
the monitor in the direction of the
the monitor in the direction of the
[
.
The 1 (power) indicator lights up in red.
2
Press the
1
(power) switch on the front right of the
monitor.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
• Turn off the monitor, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
back cover
1
to the DVI-D input connector
(digital RGB) for INPUT1 or
INPUT2
(digital RGB) for INPUT1 or
INPUT2
to the HD15 input connector
(analog RGB) for INPUT1 or
INPUT2
(analog RGB) for INPUT1 or
INPUT2
2
HD15-HD15
video signal
cable (analog
RGB)
(supplied)
video signal
cable (analog
RGB)
(supplied)
DVI-D video signal
cable (digital RGB)
(supplied)
cable (digital RGB)
(supplied)
4
power cord
(supplied)
(supplied)
3
to power
outlet
outlet
to AC IN
MAIN POWER
2
1