KitchenAid 15'' Automatic Ice Maker Guía De Instalación

■

Connect the ice maker drain to your drain in accordance with 
the International Plumbing Code and any local codes and 
ordinances.

■

The drain pump discharge line must terminate at an open 
sited drain. 

■

Maximum rise 10 ft (3.1 m)

■

Maximum run 100 ft (30.5 m)

NOTES: 

■

If the drain hose becomes twisted and water cannot drain, 
your ice maker will not work.

■

It may be desirable to insulate the drain line thoroughly up to 
the drain inlet. An Insulation Sleeve kit, Part Number 
W10365792, is available for purchase.  

■

Do not connect the outlet end of the drain tube to a closed 
pipe system to keep drain water from backing up into the ice 
maker.

■

Drain pump maximum capability: For every 1 ft (0.31 m) of 
rise, subtract 10 ft (3.1 m) of maximum allowable run.

After ensuring that the drain system is adequate, follow these 
steps to properly place the ice maker:

1. Plug into a grounded 3 prong outlet.

2. Style 1—For gravity drain system, push the ice maker into 

position so that the ice maker drain tube is positioned over 
the PVC drain reducer. See “Gravity Drain System.”

Style 2—For drain pump system connect the drain pump 
outlet hose to the drain. See “Drain Pump System.”

3. Recheck the ice maker to be sure that it is level. See  

“Leveling.”

4. If it is required by your local sanitation code, seal the cabinet 

to the floor with an approved caulking compound after all 
water and electrical connections have been made.

³⁄₄

⁵⁄₁₆

A

D

C

B