Nikon D700 Manual De Usuario

327

U

At the default setting of 

Sub-command dial, aperture can 

only be adjusted with the sub-command dial (or with the 
main command dial if 

On is selected for Change main/sub). 

If 

Aperture ring is selected, aperture can only be adjusted 

with the lens aperture ring and the camera aperture display 
will show aperture in increments of 1 EV (aperture for type G 
lenses is still set using the sub-command dial). Live view is 
not available when 

Aperture ring is selected and a CPU lens 

with an aperture ring is attached. Note that regardless of the 
setting chosen, the aperture ring must be used to adjust 
aperture when a non-CPU lens is attached.

At the default setting of 

Off, the multi selector is used to 

choose the picture displayed during full-frame playback, 
highlight thumbnails, and navigate menus. If 

On is selected, 

the main command dial can be used to choose the picture 
displayed during full-frame playback, move the cursor left or 
right during thumbnail playback, and move the menu 
highlight bar up or down. The sub-command dial is used to 
display additional photo information in full-frame playback 
and to move the cursor up or down during thumbnail 
playback. While menus are displayed, rotating the sub-
command dial right displays the sub-menu for the selected 
option, while rotating it left displays the previous menu. To 
make a selection, press 

2, the center of the multi selector, or 

J.