Nikon D750 Manual De Usuario

444

: Control the camera remotely from a 

computer to record movies and photographs and save 
photographs directly to the computer hard disk. When 
Camera Control Pro 2 is used to capture photographs 
directly to the computer, the PC connection indicator 
(

c) will appear in the control panel.

Note: Use the latest versions of Nikon software; see the websites listed on 
page xxiii for the latest information on supported operating systems. At 
default settings, Nikon Message Center 2 will periodically check for updates 
to Nikon software and firmware while you are logged in to an account on the 
computer and the computer is connected to the Internet. A message is 
automatically displayed when an update is found.

0 193)

• Wireless Remote Control ML-L3: The ML-L3 uses a 3 V CR2025 

battery.

Pressing the battery-chamber latch to the right (q), 
insert a fingernail into the gap and open the battery 
chamber (w). Ensure that the battery is inserted in the 
correct orientation (r).

• Wireless Remote Controller WR-R10/WR-T10: When a WR-R10 

wireless remote controller is attached, the camera can 
be controlled wirelessly using a WR-T10 wireless 
remote controller.

• Wireless Remote Controller WR-1: The WR-1 can function as 

either a transmitter or a receiver and is used in 
combination either with another WR-1 or a WR-R10 or 
WR-T10 wireless remote controller. For example, a 
WR-1 can be connected to the accessory terminal for 
use as a receiver, allowing camera settings to be 
changed or the shutter to be released remotely by 
another WR-1 acting as a transmitter.

Availability may vary with country or region. See our website or brochures for the latest 
information.