Nikon Nikon Scan Guía Del Software
- 28 -
Cropping Coordinates
The location of the current crop is given by the absolute
numerical position of its top and left sides. The distance, in
pixels, from the top to the bottom of the crop is displayed as
the pixel height, the distance from the left to the right side of
the crop as the pixel width. These coordinates are displayed in
pixels, regardless of the units selected for Width and Height
(and corresponding ruler display) in the size control area.
numerical position of its top and left sides. The distance, in
pixels, from the top to the bottom of the crop is displayed as
the pixel height, the distance from the left to the right side of
the crop as the pixel width. These coordinates are displayed in
pixels, regardless of the units selected for Width and Height
(and corresponding ruler display) in the size control area.
Output Resolution
Enter the desired resolution in the “Output Resolution” field in
the dialog box in order to set the output resolution. The
resolution specified here refers to the output resolution of the
scanned image; enter a value suitable for the final purpose of
the scan.
the dialog box in order to set the output resolution. The
resolution specified here refers to the output resolution of the
scanned image; enter a value suitable for the final purpose of
the scan.
If an unacceptable value is entered, it will be shown in red.
The units for resolution can be selected from the pop-up menu.
When this selection is changed, the value in the box is converted
to the new units.
When this selection is changed, the value in the box is converted
to the new units.
Selection
Unit
Pixels/Inch
Pixels/Inch
Pixels/cm
Pixels/Centimeter
Pixels/mm
Pixels/Milimeter
Pixels/Picas
Pixels/Pica
Pixels/Point
Pixels/Point