Nikon WP-N1 Waterproof case ( J1, J2) Manual De Usuario

Descargar
Página de 224
15
En
4
  Grease the O-ring.
If the O-ring is not properly greased, it may 
crack or peel, causing leaks.  If the surface of 
the O-ring appears dry, place a drop of silicon 
grease on your index fi nger and spread grease 
on the O-ring by sliding it between your thumb 
and index fi nger, evenly covering the ring.  Do 
not use cloth or paper, as these may leave fi bers on the O-ring.  Note 
that applying too much grease may cause foreign objects to adhere 
more readily to the ring, preventing the case from sealing properly.
5
  Replace the O-ring.
Making sure the O-ring and guide are free 
of foreign objects, place the O-ring so that it 
runs evenly at the same level all the way round 
the O-ring guide, without undue stretching 
or twisting and without protruding from the 
guide.
D
 O-Rings
The O-ring requires periodic replacement.  Replace the O-ring immediately if it is damaged, 
cracked, warped, or has lost its elasticity.  O-rings should be replaced at least once a year.  Use 
only silicon grease designated for use in this product; replacement O-rings and silicon grease 
can be purchased from a Nikon camera retailer or Nikon-authorized service agent.  Do not 
use COOLPIX or NIKONOS O-ring lubricant (grease).
D
 Cleaning
Do not use detergents or volatile chemicals such as alcohol or thinner when cleaning the 
case or O-ring.  Failure to observe this precaution could result in damage to the case or 
O-ring.