Avocent DB-9 FM - RJ-45 Adapter 210129 Manual De Usuario

44        ESP Serial Hub Installer/User Guide

After the ESP serial hub has a configured IP address, the administrator may enable the serial 
configuration utility on any serial port. When this connection method is enabled, the configuration 
utility will become active if the port is not in use and the 

 key is pressed three times in a row.

This access method is enabled on port 1 and disabled on other ports by default. You may enable/
disable the configuration utility access method on each port using the configuration utility (see 
Displaying or Changing the Serial Port Physical Interface on page 48), the web interface (see 
Displaying or Changing the Serial Port Physical Interface on page 34) or a configuration file (see 
Port Configuration Utility command on page 58).

The configuration utility has a menu-based text interface. Each menu contains a numbered list of 
operations. When you enter the number associated with an operation and then press 

, you are 

either presented with another menu containing a numbered list of operations or the selected 
command is initiated.

For example, the following is the Top Menu, which is displayed when you access the utility.

0 -> Server Configuration

1 -> Serial Port Attributes

2 -> Serial port connection methods

3 -> Port interface

4 -> Send break

5 -> Status

6 -> Debug 

7 -> Change password

99 -> Exit

enter command : 

If you enter 

 and then press 

, the Server Configuration Menu appears. The following is an 

excerpt from the Server Configuration Menu:

0 -> Return to Top Menu

1 -> Network configuration

2 -> Flash status and update

3 -> Configurable features

4 -> Configuration File Download

5 -> Hardware information

6 -> Reboot

7 -> Re-Initialize (factory defaults)

99 -> Exit

enter command:

From the Server Configuration Menu, you may enter selection numbers for a desired operation, 
return to the Top Menu or exit the configuration utility.